PRESS
FOLLOW THE INSTRUCTIONS IN THIS VIDEO TO LEARN HOW TO APPLY EACH ONE OF OUR PRODUCTS.
RUBBERTOP IN THE NEWS
Clear any remaining dust, dirt, grease, debris, and any other material that may prevent proper adhesion.
Do not apply if there is a forecast of rain in the next 48 hours or if it rained 48 hours prior to application. Ideal temperature for application is between 40ºF and 100ºF.
STEP 1
REMOVE ALL PREVIOUS ROOF COATING PRODUCTS.
Clear any remaining dust, dirt, grease, debris, and any other material that may prevent proper adhesion.
Do not apply if there is a forecast of rain in the next 48 hours or if it rained 48 hours prior to application. Ideal temperature for application is between 40ºF and 100ºF.
Membership at the Greater Houston Partnership offers the opportunity to work alongside other business leaders to make a positive impact on our region. Membership also provides unrivaled opportunities to connect with other professionals and companies, learn from thought leaders and gain insight into critical information to make informed business decisions. Join us and help us make Houston a great place to live, work and build a business.
STEP 2
APPLY A BASE COAT OF
APPLY A BASE COAT OF
RUBBERTOP® CONCENTRATED PRIMER
Add 1.4 gallons of water and mix thoroughly. Approximate Coverage 400 Sq. Ft. Apply by Roller or Airless Sprayer. Base Coating must be fully dry before applying RubberTop® Roof Coating.
STEP 3
APPLY RUBBERTOP® RUBBERIZED PATCH TO SEAL FASTENERS, CRACKS, AND LEAKS.
Use reinforcing fabric cut in 6 inch wide strips, all across damaged area.
Allow repairs to dry before applying RubberTop® Roof Coating.
STEP 3
APPLY RUBBERTOP® RUBBERIZED PATCH TO SEAL FASTENERS, CRACKS, AND LEAKS.
Use reinforcing fabric cut in 6 inch wide strips, all across damaged area.
Allow repairs to dry before applying RubberTop® Roof Coating.
STEP 4
APPLY RUBBERTOP® ROOF COATING: MIX THOROUGHLY!
APPLY RUBBERTOP® ROOF COATING: MIX THOROUGHLY!
85 sq. ft per 1 Gallon per Coat
Apply by Roller or Airless Sprayer. Do not add water!
Apply first coat: Apply coatings evenly taking stroker in one direction, going North and South or East and West.
Recoating: After first coat is fully dry, apply second coat at a right angle to the first coat. If you went North and South the first time, go East and West the second.
MUST APPLY A MINIMUM OF 2 COATS