APPLICATION

FOLLOW THE INSTRUCTIONS IN THIS VIDEO TO LEARN HOW TO APPLY EACH ONE OF OUR PRODUCTS.

STEP 1

REMOVE ALL PREVIOUS ROOF COATING PRODUCTS.

Clear any remaining dust, dirt, grease, debris, and any other material that may prevent proper adhesion.

Do not apply if there is a forecast of rain in the next 48 hours or if it rained 48 hours prior to application. Ideal temperature for application is between 40ºF and 100ºF.

STEP 1

REMOVE ALL PREVIOUS ROOF COATING PRODUCTS.

Clear any remaining dust, dirt, grease, debris, and any other material that may prevent proper adhesion.

Do not apply if there is a forecast of rain in the next 48 hours or if it rained 48 hours prior to application. Ideal temperature for application is between 40ºF and 100ºF.

STEP 2

APPLY A BASE COAT OF
RUBBERTOP® CONCENTRATED PRIMER

Add 1.4 gallons of water and mix thoroughly. Approximate Coverage 400 Sq. Ft. Apply by Roller or Airless Sprayer. Base Coating must be fully dry before applying RubberTop® Roof Coating.

STEP 2

APPLY RUBBERTOP® RUBBERIZED PATCH TO SEAL FASTENERS, CRACKS, AND LEAKS.

Use reinforcing fabric cut in 6 inch wide strips, all across damaged area.
Allow repairs to dry before applying RubberTop® Roof Coating.

STEP 3

APPLY RUBBERTOP® RUBBERIZED PATCH TO SEAL FASTENERS, CRACKS, AND LEAKS.

Use reinforcing fabric cut in 6 inch wide strips, all across damaged area.
Allow repairs to dry before applying RubberTop® Roof Coating.

STEP 3

APPLY RUBBERTOP® ROOF COATING: MIX THOROUGHLY!
85 sq. ft per 1 Gallon per Coat

Apply by Roller or Airless Sprayer. Do not add water!
Apply first coat: Apply coatings evenly taking stroker in one direction, going North and South or East and West.
Recoating: After first coat is fully dry, apply second coat at a right angle to the first coat. If you went North and South the first time, go East and West the second.

MUST APPLY A MINIMUM OF 2 COATS

STEP 4

APPLY RUBBERTOP® ROOF COATING: MIX THOROUGHLY!
85 sq. ft per 1 Gallon per Coat

Apply by Roller or Airless Sprayer. Do not add water!
Apply first coat: Apply coatings evenly taking stroker in one direction, going North and South or East and West.
Recoating: After first coat is fully dry, apply second coat at a right angle to the first coat. If you went North and South the first time, go East and West the second.

MUST APPLY A MINIMUM OF 2 COATS